Hallis Arc Double Bracket

The double bracket that turns a Hallis Arc pole into a double-pole set: your main curtain on the front pole, a voile or sheer behind it on the rear, both hung from one set of wall supports.

Three fittings for three jobs: End Bracket for the last support at each end of the run, Centre Bracket for support along the way on longer poles, and Passing Bracket where the pole needs to pass through a support (a corner, or a fixed obstruction) rather than stop at it.

In the same 10 finishes as the Arc pole itself, so the bracket matches whatever you've already chosen.

What else you need to build the full double-pole set

This bracket is the fitting only. To build the complete installation, order:

• Two Hallis Arc Curtain Poles, same finish and length: one for the front (with your chosen finial), one for the rear (a plainer finial, such as Stud, works well here as it sits mostly out of sight). Each comes complete with its own single-pole brackets, finials, rings and fixings; the single brackets aren't needed for a double-pole build, only the rings and finials are, so there is a small amount of hardware you won't use.
• This double bracket, in place of those single brackets, at the same positions: two End Brackets always, plus Centre Brackets for a longer pole (as a guide, the single-pole set ships 2 brackets up to 200cm, 3 from 250 to 400cm, and 5 from 500 to 600cm; match that count here, swapping End/Centre/Passing to suit the wall).

Fitting a bay, a corner, or anything the standard bracket positions won't cover? Send us the measurements and we'll confirm the spec before you order.